Irritrol RainSensor Bedienungsanleitung PDF herunterladen (Seite 5)

B. Controllers with no sensor inputs and no pump start or master valve:

Refer to Figure 7. Disconnect the valve common wire from the controller’s common

terminal (generally marked “C”, “Com”, or “VC”). Join this wire to the White wire

using a wire connector. Attach the Brown wire to the valve common terminal.

Note: The yellow wire is not used in this application.

C. Controllers with

pump start or master valve and no sensor inputs:

Refer to Figure 8. Disconnect all common control wires from the common

terminal(s) of the controller (generally marked “C”, “Com”, or “VC”). Join these wires

to the White wire using a wire connector. (Be sure to include the common wire from

the Pump Start Relay in this connection). Attach the Brown wire to the common

terminal.

Note: The yellow wire is not used in this application.

Figure 7

Red

Common From Valves

To Valves

White

Wire Connector

Irrigation System Controller

Brown

Red

Figure 8

Red

Common From Valves

To Valves

White

Wire Connector

Pump Start

Relay

Irrigation System Controller

Brown

Red

1 2 3 4 5 6 7 8 9 10 11 12

Keine Kommentare

Irritrol RainSensor Bedienungsanleitung Seite 5